Changing From Cajun 1 Mode To Cajun 2 Mode; Changing From Cajun 2 Mode To Cajun 1 Mode - Avaya Cajun P550R Installation Manual

Changing from Cajun 1 Mode to Cajun 2 Mode

Changing from Cajun 2 Mode to Cajun 1 Mode

Cajun P550R/P880/P882 Switch Installation Guide
To change your Cajun P882 switch from Cajun 1 mode to Cajun II
mode:
1. Telnet to the switch.
2. Type enable (en) at the Cajun switch prompt to enter enable
mode. The enable mode prompt displays:
Cajun #
3. Type configure to enter configure mode. The configure prompt
displays:
Cajun (configure)#
4. Type the following command to change your switch from
Cajun mode 1 to Cajun mode 2:
Cajun (configure)# set Cajun_mode 2
This will reboot the Cajun P882 switch. It is in Cajun 2 mode after it
reboots.
To change your Cajun P882 switch from Cajun 2 mode to Cajun 1
mode:
1. Telnet to the switch.
2. Type enable (en) at the Cajun switch prompt to enter enable
mode. The enable mode prompt displays:
Cajun #
3. Type configure to enter configure mode. The configure prompt
displays:
Cajun (configure)#
4. Type the following command to change your switch from
Cajun mode 2to Cajun mode 1:
Cajun (configure)# set Cajun_mode 2
This will reboot the Cajun P882 switch. It is in Cajun 1mode after it
reboots.
Initial Configuration
3-11