Closing The Pod - Kodak 3000 SERIES User Maintenance Manual

Closing the Pod

A-61159 May 2002
4. Remove any documents from the feeder area.
5. Move the scanner forward to the front edge of the work surface.
6. Grasp the pod with one hand.
7. Pull the release latch with the other hand.
8. Gently lower the pod.
NOTE: The pod does not have to be lowered completely in order to
clear a document jam (refer to "Clearing Document Jams" in
Chapter 7, Troubleshooting).
• Close the pod by lifting the front of the pod until it snaps into place.
5-3