Table of Contents
Advertisement
5-14
4. Wipe the imaging guide with a Staticide Wipe until all residue has
been removed.
If streaking occurs, allow the wipe to partially dry and re-clean the
imaging guide.
5. Replace the imaging guide.
Make sure it is fully seated in its slot.
6. Grasp the end of the imaging guide that is in the pod and slowly pull
it straight out.
7. Wipe the imaging guide with a Staticide Wipe until all residue has
been removed.
8. Replace the imaging guide in the pod.
Make sure it is fully seated in its slot.
9. Close the side access door.
10. Close the pod firmly.
A-61159 May 2002
Advertisement
Table of Contents
