Table of Contents
Advertisement
Clearing
Document Jams
7-2
1. Remove any documents from the feeder.
2. Lower the pod slightly and open the side access door.
CAUTION:The lamps are HOT. Avoid contact with the hot lamps.
3. Locate the jammed document and remove it.
NOTE: Avoid getting fingerprints on the imaging guides.
4. Close the side access door.
5. Close the pod firmly.
Some jams can be cleared without opening the side access door.
To clear a document jam from the front of the scanner, lower the pod
slightly, remove the document, and close the pod firmly.
For greater access to the area, you can remove the feed module (refer
to "Feed Module" in Chapter 5, Maintenance).
A-61159 May 2002
Advertisement
Table of Contents
