Table of Contents
Advertisement
Imaging Guides
Cleaning the
Imaging Guides
A-61159 May 2002
For best image quality, clean both imaging guides at least once per day
(or more often if necessary) using the recommended Staticide Wipe
(CAT No. 896-5519). Use of any other cleaning materials could damage
your scanner.
NOTES: Clean the imaging guides daily if you are scanning
carbonless paper or if you are using the document printer
(Scanner 3520DP or Color Scanner 4500DP only).
During cleaning, avoid getting fingerprints on the
imaging guides.
1. Follow all of the steps in "Lowering the Pod" in this chapter.
2. Open the side access door.
3. Grasp the end of the imaging guide that is behind the side access
door and slowly pull it straight out.
5-13
Advertisement
Table of Contents
