Table of Contents
Advertisement
Replacing the
Separator Roller Tires
A-61159 May 2002
4. Wipe the separator roller with a cleaning pad until all residue has
been removed.
5. Inspect the roller.
If the roller show signs of wear or damage, replace it.
6. Replace the separator roller by aligning the pins and fitting it
into position.
7. Close the access cover.
8. Close the pod firmly.
1. Follow all of the steps in "Lowering the Pod" in this chapter.
2. Open the separator roller access cover.
3. Remove the separator roller by pushing it to the right and lifting
it out.
4. Replace each tire by sliding the tire off the core.
5-9
Advertisement
Table of Contents
