Konica Minolta Bizhub C353P User Manual page 477

Authentication unit (IC card type AU-201)
15 Authentication unit (IC card type AU-201)
15.1 Safety information
15.1.1 Important information
When using the authentication unit (IC card type), observe the following precautions in addition to the safety
information in the Quick Guide.
- Authentication unit (IC card type) is optional. It is sold or permitted to use as it is.
- This product is designed, manufactured and intended for general business use. Do not use it for
applications requiring high reliability and which may have an extreme impact on lives and property.
(Applications requiring high reliability: Chemical plant management, medical equipment management
and emergency communications management)
- Use with other authentication devices is not guaranteed.
- In order to incorporate improvements in the product, the specifications concerning this product are
subject to change without notice.
- Do not store the IC card within 1-1/2(40mm) of the card scanning area.
15.1.2 For safe use
When using the authentication unit (IC card type), observe the following precautions.
- Do not this product near water, otherwise it may be damaged.
- Do not cut, damage, modify or forcefully bend the USB cable. A malfunction may occur as a result of a
damaged or cut USB cable.
- Do not disassembly this device, otherwise it may be damaged.
15.1.3 Regulation notices
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
FCC: Declaration of Conformity
Product Type
Product Name
(This device complies with Part 15 of the FCC Rules.) Operation is subject to the following two conditions: (1) this de-
vice may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of this device.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interface by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
WARNING
The design and production of this unit conform to FCC regulations, and any changes or modifications must
be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user
without first contacting the manufacturer will be subject to penalty under FCC regulations.
C353P
Authentication Unit (IC card Type)
AU-201
15
15-2