Replacing consumables
2
Open the front door.
–
Check that an imaging unit of the same color as the
one to be replaced has been prepared.
3
Press down to release the unlock lever of the imaging unit
to be replaced.
4
Pull the imaging unit towards you to remove it.
5
Remove the imaging unit from its packaging.
–
The imaging unit can easily be damaged by light.
Leave the imaging unit in the black protective bag
until immediately before it is to be installed.
–
Do not hold the top part of the imaging unit, otherwise
the PC drum may be damaged, resulting in decreased
image quality.
C353P
11
K
P U S
H
K
11-10