Installing the printer driver for Windows
3.6
Installation using the wizard (Windows NT 4.0)
3.6.1
Network connection (LPR)
When using the LPR printing, specify the port during the printer driver installation process.
TCP/IP setting for this machine
Specify the IP address in the TCP/IP Setting screen of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to
LPD setting for this machine
To use LPR printing, enable LPD print in the LPD Setting screen of this machine.
!
Detail
For details on the LPD settings of this machine, refer to
Printer driver installation using the Add Printer Wizard
Reminder
When installing on Windows NT 4.0, administrator permissions are required.
To use the LPR port in Windows NT 4.0, Microsoft TCP/IP Print Services must be installed on the
computer.
1
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
2
Click the [Start] button, point to "Settings", and then click "Printers".
3
Double-click "Add Printer".
The Add Printer Wizard starts.
4
Follow the on-screen instructions.
5
In the dialog box for specifying the connection method, select "This computer", and then click the
[Next] button.
6
Click the [Next] button.
A screen for specifying ports appears.
7
Click the [Add Port] button.
8
In the "Available Printer Ports" list, select "LPR Port", and then click the [New Port] button.
9
Enter the IP address of this machine in the "Address" box and "Print" in the "Queue Name" box, and
then click the [OK] button.
–
The information entered here is case-sensitive.
10
Select the created port, and then click the [Next] button.
11
Click the [Have Disk] button.
12
Click the [Browse] button.
13
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
–
Select the specified folder according to the printer driver to be used, the operating system, and the
language.
C353P
"Network settings" on page
"Network settings" on page
3
2-2.
2-2.
3-34