Windows Nt 4.0; Automatic Installation Using The Installer; Installer Operating Environment; Settings Of This Machine - Konica Minolta Bizhub C353P User Manual

Multifunctionall print system
Hide thumbs Also See for Bizhub C353P:
Table of Contents

Advertisement

Installing the printer driver for Windows
3.1.3

Windows NT 4.0

Setup method
Connection
method that can
be set up with
the Add Printer
wizard
Note
Before using this machine in a network environment, the network settings must be specified for this
machine. For details, refer to the
To install the printer driver under Windows NT 4.0, log on using a user name that is authorized by the
administrator.
3.2

Automatic installation using the installer

This installer automatically detects whether this machine is connected via USB or on the same TCP/IP
network as the computer, then installs the required printer driver. You can also manually specify the
connection destination during installation.
Reminder
When installing the driver on NT 4.0/2000/XP/Vista/Server 2003, administrator permissions are
required.
When this machine is connected via USB, if a wizard for adding new hardware starts up, click the
[Cancel] button.
3.2.1

Installer operating environment

Item
Operating system
Processor
Memory
*
With Windows NT 4.0, in order to install this machine connected directly to a network using the TCP/IP protocol,
Microsoft TCP/IP Print Services must first be installed on the computer.
3.2.2

Settings of this machine

Specify the IP address of this machine.
Note
To allow this machine to be automatically detected when connected to a network, be sure to set the IP
address for this machine before starting installation. For details, refer to
page
2-2.
Depending on the connection method and protocol, change the network settings of this machine.
-
Port9100: Enable the RAW port number (9100 at default), in the TCP/IP screen.
-
IPP/IPPS: Enable IPP print in the IPP Setting screen.
C353P
Connection method
LPR
A network connection using the LPR print
service.
"Network settings" on page
Operating environment
Windows NT Workstation/Server Version4.0 (Service Pack 6 or later), Windows 2000 Profes-
sional/Server (Service Pack 3 or later), Windows XP Home Edition/Windows XP Professional,
Windows XP Professional x64 Edition, Windows Vista Home Basic/Home Premium/Ulti-
mate/Business/Enterprise, Windows Vista Home Basic/Home Premium/Ultimate/Busi-
ness/Enterprise x64 Edition, Windows Server 2003 Standard Edition, Windows Server 2003
x64 Edition
According to the environment recommended for the operating system
Capacity recommended for the operating system
With sufficient memory resources in the operating system and application being used
Refer to
"Installation using the wizard
(Windows NT 4.0)" on page 3-34
2-2.
"Network settings" on
3
3-4

Advertisement

Table of Contents
loading

Table of Contents