Wiring Connection; Part List For Installation - Kenwood DPX-U5140 Instruction Manual

Wiring connection

Antenna terminal
Front/ Rear/ subwoofer output
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Car fuse box
Ignition switch
Car fuse box
Battery
To the metallic body or chassis of the car
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
When connecting to an external amplifier,
connect its ground wire to the car's chassis to
avoid damaging the unit.
Fuse (10 A)
If no connections are made, do not let the wire come out from
the tab.
To the terminal that is grounded
Brown
when the telephone rings or
(Mute control wire)
during conversation ( 14)
(To connect the Kenwood
navigation system, refer your
navigation manual.)
To the power control terminal
Blue/White
when using the optional power
(Power control wire/
amplifier or to the antenna
Antenna control wire)
control terminal in the vehicle
Light blue/yellow
To the steering wheel remote
control adapter
(Steering remote
control wire)
Part list for
installation
(A) Trim plate (only for
Toyota car)
(B) Wiring harness
(C) Round head screws
(M5 × 8 mm)
(D) Flat head screws
(M5 × 8 mm)
17
ENGLISH