B-5
PROCESS
STICK
WIRE FEED, LN-25 WITH
INTERNAL CONTACTOR
TIG, TIG MODULE WITH
WITH CONTACTOR KIT
CONTROL CABLE, & ARC
START SWITCH
WIRE FEED, LN-15
ACROSS the ARC
(has internal contactor)
Downloaded from
www.Manualslib.com
SUMMARY OF WELDING PROCESSES
CONTROL
CABLE
USED
No
No
Yes
No
RANGER 10,000 PLUS AND RANGER 10,000
manuals search engine
OPERATION
ELECTRODE
IDLE
WHEN NOT
MODE
WELDING
AUTO
Hot
AUTO
Cold
High
Cold
Auto
Cold
B-5
TO START
WELDING
Touch electrode to work.
Welding starts immediately
and engine goes to high
idle.
Press gun trigger, LN-25
contactor closes. Welding
starts immediately and
engine goes to high idle.
NOTE: Output Control
must be set above "3"
Press Arc Start Switch
contactor closes,
welding starts immediately.
Press gun trigger.
LN-15 contactor closes,
Welding starts immediately
Note: Output Control must
be set above "3".