Summary Of Welding Processes - Lincoln Electric RANGER 10,000 PLUS Operator's Manual

B-5
PROCESS
STICK
WIRE FEED, LN-25 WITH
INTERNAL CONTACTOR
TIG, TIG MODULE WITH
WITH CONTACTOR KIT
CONTROL CABLE, & ARC
START SWITCH
WIRE FEED, LN-15
ACROSS the ARC
(has internal contactor)
OPERATION

SUMMARY OF WELDING PROCESSES

CONTROL
CABLE IDLE
USED MODE
No AUTO
No AUTO
Yes High
No Auto
RANGER 10,000 PLUS AND RANGER 10,000
ELECTRODE
WHEN NOT
WELDING
Hot Touch electrode to work.
Welding starts immediately
and engine goes to high
idle.
Cold Press gun trigger, LN-25
contactor closes. Welding
starts immediately and
engine goes to high idle.
NOTE: Output Control
must be set above "3"
Cold Press Arc Start Switch
contactor closes,
welding starts immediately.
Cold Press gun trigger.
LN-15 contactor closes,
Welding starts immediately
Note: Output Control must
be set above "3".
B-5
TO START
WELDING