Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Sp Imp.); Selecting The Remote Control Id (Remote Id); Resetting The Parental Lock Code Number (Sr Lock) - Yamaha RX-V6671 Owner's Manual

ADVANCED SETUP menu items

Item Function
SP IMP. Changes the speaker impedance setting.
REMOTE ID Selects the remote control ID of the main unit.
Resets the Parental Lock code number for SIRIUS
SR LOCK
Satellite Radio.
TV FORMAT Switches the video signal type.
MON.CHK Removes the limitation on HDMI video output.
INIT Restores the default settings.
UPDATE Updates the firmware.
Checks the version of firmware currently installed on
VERSION
this unit.

Changing the speaker impedance setting (SP IMP.)

SP IMP. -8 MIN
Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.
Settings
Select this when you connect 6-ohm speakers to this unit. You can also
6 Ω MIN
use 4-ohm speakers as the front speakers.
8 Ω MIN (default)
Select this when you connect 8-ohm or higher speakers to this unit.

Selecting the remote control ID (REMOTE ID)

REMOTE ID -ID1
Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
■
Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
Page
1
Press CODE SET on the remote control using a pointed object such as the tip of a
102
ballpoint pen.
102
2
Press SOURCE/RECEIVER.
3
Use the numeric keys to enter "5019" (ID1) or "5020" (ID2).
102
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
102
If it blinks 6 times, registration failed. Repeat from step 1.
103
103
103
• The registered remote control codes (p.104) are not cleared even if you change the remote control ID.
103

Resetting the Parental Lock code number (SR LOCK)

SIRIUS
SRXLOCK-CANCEL
Reset the Parental Lock code number for SIRIUS Satellite Radio.
Choices
RESET Resets the Parental Lock code number.
CANCEL Does not perform a reset.

Switching the video signal type (TV FORMAT)

TV FORMAT-NTSC
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC (default), PAL
VOL.
MUTE
SW
PL PR
C
L R
SL SR
SBL SB SBR
102
En