Connecting Audio Devices (Cd Players, Etc.) - Yamaha RX-V6671 Owner's Manual

1 2 3 4
Playback device connections
1
After connecting external devices (TV, playback devices, etc.) and
power cable of this unit, turn on this unit and TV.
2
Switch the TV input to display the video from this unit.
3
Press ON SCREEN.
4
Use the cursor keys to select "Input" and press ENTER.
5
Use the cursor keys ( / ) to select "AV2" (video input jack to be used)
and press the cursor key ( ).
6
Use the cursor keys to select "Audio In" and press ENTER.
7
Use the cursor keys to select "AV5" (audio input jack to be used).
8
Press ON SCREEN.
Now the necessary setting is complete.
If you select "AV2" as the input source by pressing AV2, the video/audio played
back on the video device will be output from this unit.
5 6 7 8 9

Connecting audio devices (CD players, etc.)

Connect audio devices such as CD players and MD players to this unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
Audio output jacks on audio device
Digital optical
Digital coaxial
Analog stereo
This unit (rear)
DOCK NETWORK
HDMI OUT (
ARC
SIRIUS
ANTENNA
COMPONENT
COMPONENT
VIDEO
VIDEO
AM FM
OPTICAL
P R
P R
P 75Ω
B
P
B VID
VIDEO
COAXIAL
Y
Y
MONITOR OU
L
L
R
R
OPTICAL COAXIAL COAXIAL OPTICAL
AV
(CD) (TV)
OUT
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6 AUDIO 1 AUDIO 2
AV1~6 jacks
AUDIO1~2 jacks
If you select the input source by pressing AV1~6 or AUDIO1~2, the audio played back
on the audio device will be output from this unit.
Audio output jacks on this unit
AV1 (OPTICAL)
AV4 (OPTICAL)
AV2~3 (COAXIAL)
AV5~6 (AUDIO)
AUDIO1~2
O O
OPTICAL
C C
COAXIAL
L
Audio device
L L
R
R R
Audio output
(any of digital optical, digital coaxial,
analog stereo)
28
En