Instructions To Change Cookie Settings - Wells M4200 Owner's Manual

Hide thumbs Also See for M4200:
Table of Contents

Advertisement

IMPORTANT: Programming changes to be performed by qualified persons only.
INSTRUCTIONS FOR CHANGING COOKIE SETTINGS
The Wells Convection Oven comes pre-programmed from the factory for cookies baked at 6:00 minutes at
a temperature of 375 F. Following is the procedure to change the settings only in the event your location
uses a different cookie or manufacturer.
NOTE: Oven must be in turned ON. No cooling timer or bake cycle can be active.
ACTION
1. To enter programming mode, press and hold
PROG button for 5 seconds, display will read
2. Press PROG button until display reads
<EDIT MENU
3. Press #2 or #8 button to select YES.
4. Press PROG button and enter the
following coded password
5. Press PROG button
6. Press PROG button
7. Press button #4 to select COOKIES
8. Press PROG button to cycle through
the following settings until display
reads COOK TIME
9. Enter desired cook time.
10. Press PROG button and enter desired
temperature
11. Press PROG button repeatedly to cycle
through factor values and factor times (1-5)
until display reads COOLING TIMER.
IMPORTANT: Do not change FACTOR VALUES or TIMES for existing menu items.
12. If cooling timer is desired,
press button #2 or #8 to select YES.
If not continue to Step 15.
13. Press PROG button and enter the
desired cooling time.
14. Press PROG button.
This indicates the end of this programming cycle.
If no other menu items need programming, continue with Step 15.
If other menu items need programming, go to Step 6.
15. Press PROG button
16. Press START button until displays
Shows OVEN READY
Changing the cookie settings is now complete.
PROGRAMMING INSTRUCTIONS (continued)
NO>
9793
DISPLAY WILL READ
TEMP CAL
EDIT MENU
EDIT MENU
PASSWORD
SELECT DAYPART # 1
SEL->
COOKIES
COOKIES
ENABLE
CANCEL
COOK TIME
COOK TIME
COOK TEMP
FACTOR 1 VALUE
FACTOR 1 TIME
COOLING TIMER
COOLING TIMER
COOLING TIME
UPDATING MENU ITEM
SELECT DAYPART
OVEN READY
19
NO
NO
YES
0000
YES
A/M MANUAL
06:00
06:00
375
00000
00000
NO
YES
20:00
# 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents