Going For A Run; History; Viewing An Activity; Saving An Activity As A Track - Garmin D2 Pilot Owner's Manual

• Select Setup > Units to change units of measurement.
For example, you can record your biking distance in
kilometers instead of miles.
• Customize the hold function of your arrow keys for your
activity (Customizing the Arrow
• Select Setup > Fitness > Auto Lap to set your lap distance.
The default distance is 1 mi (1.60 km).
• Enter your fitness user profile information
Fitness User Profile) and heart rate zones
Heart Rate Zones) to obtain accurate calorie measurements.

Going for a Run

Before you go for a run, you must change the profile to running
(Changing Profiles).
1 Select the action key.
2 Select Start GPS.
3
Wait while the device locates satellites.
4
Hold to start the timer.
5
Start running.
You can hold to pause and resume your run. You can hold
to mark a lap.
6
Select the action key.
7
Select Stop GPS to finish your run.
The device automatically saves your run.

History

History includes date, time, distance, calories, average speed or
pace, ascent, descent, and optional ANT+™ sensor information.
NOTE: History is not recorded while the timer is stopped or
paused.
When the device memory is full, a message appears. The
device does not automatically delete or overwrite your history.
You can upload your history to Garmin Connect
Connect) or BaseCamp (Garmin
keep track of all your activity data.

Viewing an Activity

You can view the history or a map of your fitness activity.
1
Select the action key.
2
Select FIT History.
A list of your activities appears by date.
3
Select an activity.
4
Select Details or View Map.

Saving an Activity as a Track

You can save an activity as a track using GPS. This allows you
to perform GPS functions with the activity, such as navigation
and routes.
1 Select the action key.
2
Select FIT History.
3
Select an activity.
4
Select Save as Track.

Deleting an Activity

1
Select the action key.
2
Select FIT History.
3
Select an activity.
4
Select Delete > Yes.

Using Garmin Connect

1 Connect the device to your computer using the USB cable.
2
Go to www.garminconnect.com/start.
12
Keys).
(Setting Your
(Setting Your
(Using Garmin
Adventures) periodically to
3
Follow the on-screen instructions.

ANT+ Sensors

The device is compatible with these optional, wireless ANT+
accessories.
• Heart rate monitor (Putting On the Heart Rate
• GSC™ 10 speed and cadence sensor
Bike Cadence Sensor)
• tempe wireless temperature sensor (tempe)
For information about compatibility and purchasing additional
sensors, go to http://buy.garmin.com.

Pairing Your ANT+ Sensors

Before you can pair, you must put on the heart rate monitor or
install the sensor.
Pairing is the connecting of ANT+ wireless sensors, for
example, connecting a heart rate monitor with your Garmin
device.
1
Bring the device with range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Select the action key.
3
Select Setup > ANT Sensor.
4
Select your sensor.
5
Select New Search.
When the sensor is paired with your device, the sensor
status changes from Searching to Connected. Sensor data
appears in the data page loop or a custom data field.

tempe

The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.

Putting On the Heart Rate Monitor

NOTE: If you do not have a heart rate monitor, you can skip this
task.
You should wear the heart rate monitor directly on your skin,
just below your breastplate. It should be snug enough to stay in
place during your activity.
1
Snap the heart rate monitor module
2
Wet both electrodes
Á
strong connection between your chest and the transmitter.
3
If the heart rate monitor has a contact patch
contact patch.
Monitor)
(Using an Optional
onto the strap.
À
on the back of the strap to create a
, wet the
Â
ANT+ Sensors