Marking And Starting Navigation To A Man Overboard Location; Geocaches; Downloading Geocaches; Navigating To A Geocache - Garmin D2 Pilot Owner's Manual

Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it. You can customize the
hold function of the or
quickly (Customizing the Arrow
1
Select the action key.
2
Select GPS Tools > MOB > Start.
The map page opens showing the route to the MOB location.
3
Navigate using the compass (Compass) or map (Map).

Geocaches

A geocache is like a hidden treasure. Geocaching is when you
hunt for hidden treasures using GPS coordinates posted online
by those hiding the geocache.

Downloading Geocaches

1
Connect your device to a computer using the USB cable.
2
Go to www.opencaching.com.
3
If necessary, create an account.
4 Sign in.
5
Follow the on-screen instructions to find and download
geocaches to your device.

Navigating to a Geocache

Before you can navigate to a geocache, you must go to
www.opencaching.com, and download a geocache to your
device.
Navigating to a geocache is like navigating to any other
location.
• See the navigation section
more information.
• Go to the profiles section
create a profile for geocaching.
• Go to the geocache settings
customize your device settings.
• Go to the data pages section
to customize your data fields.

Logging the Attempt

After you have attempted to find a geocache, you can log your
results.
1
Select the action key.
2
Select GPS Tools > Geocaches > Log Attempt.
3
Select Found, Did Not Find, or Unattempted.
4
Select an option:
• To begin navigation to a geocache nearest you, select
Find Next.
• To end the logging, select Done.

chirp™

A chirp is a small Garmin accessory that is programmed and left
in a geocache. You can use your device to find a chirp in a
geocache. For more information about the chirp, see the chirp
Owner's Manual at www.garmin.com.

Finding a Geocache with a chirp Device

1
Select the action key.
2
Select Setup > Geocaches > chirp > On.
3
Hold .
4
Select Start GPS.
Geocaches
key to access the MOB function
Keys).
(Navigating to a Destination) for
(Creating a Custom Profile) to
(Geocache Settings) to
(Customizing the Data
5
Wait while the device locates satellites.
6
Select the action key.
7
Select GPS Tools > Geocaches.
8 Select a geocache, and select chirp to show chirp details
while you are navigating.
9
Select Go, and navigate to the geocache
Destination).
When you are within 33 ft. (10 m) of the geocache that
contains a chirp device, a message appears.
To use some applications, you must add the application or the
GPS Tools option to the main menu
Menu).

Jumpmaster

The jumpmaster feature is designed for experienced skydivers,
particularly those in the military.
The jumpmaster feature follows military guidelines for
calculating the high altitude release point (HARP). The device
detects automatically when you have jumped to begin
navigating toward the desired impact point (DIP) using the
barometer and electronic compass.

Planning a Jump

Jumpmaster is for use by experienced skydivers only.
Jumpmaster should not be used as a primary skydiving
altimeter. Failure to input the appropriate jump related
information into Jumpmaster can lead to serious personal injury
or death.
1
Select a jump type
2
Enter the jump information
The device calculates the HARP.
3
Select GOTO HARP to start navigation to the HARP.

Jump Types

Pages)
The jumpmaster feature allows you to set the jump type to one
of three types: HAHO, HALO, or Static. The jump type selected
determines what additional setup information is required
(Entering Jump
and opening altitudes are measured in feet above ground level
(AGL).
HAHO: High Altitude High Opening. The jumpmaster jumps
from a very high altitude and opens the parachute at a high
altitude. You must set a DIP and a drop altitude of at least
1,000 feet. The drop altitude is assumed to be the same as
the opening altitude. Common values for a drop altitude
range from 12,000 to 24,000 feet AGL.
HALO: High Altitude Low Opening. The jumpmaster jumps from
a very high altitude and opens the parachute at a low
altitude. The required information is the same as the HAHO
jump type, plus an opening altitude. The opening altitude
must not be greater than the drop altitude. Common values
for an opening altitude range from 2,000 to 6,000 feet AGL.
Static: The wind speed and direction are assumed to be
constant for the duration of the jump. The drop altitude must
be at least 1,000 feet.

Entering Jump Information

1
Select the action key.
2
Select Jumpmaster.
3
Select a jump type

Applications

(Customizing the Main
WARNING
(Jump Types).
(Entering Jump
Information). For all jump types, drop altitudes
(Jump Types).
(Navigating to a
Information).
7