Table of Contents
Advertisement
Reverse this procedure to install the solid-state drive.
Memory module
Description
8 GB
4 GB
2 MB for use only on computer models equipped with an AMD processor
2 GB for use only on computer models equipped with an Intel processor
Before removing the memory module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Remove the memory module:
1.
Loosen the Phillips PM2.5×4.5 captive screw (1) that secures the memory module compartment
cover to the computer.
2.
Lift the right edge of the memory module compartment cover (2) until it rests at an angle.
60
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page
52).
Spare part number
693374-001
691740-001
652972-001
691739-001
Hide quick links:
Advertisement
Table of Contents
