Chapter 4
Chapter 4
Accessories
Introduction
MC7090CN accessories, listed below, provide a variety of product support capabilities.
Cables
Snap one of the following cables on to the EDA to connect an external device.
USB Client charge cable
•
RS232 charge cable
•
DEX cable
•
Modem inverter
•
Autocharge cable.
•
Cradles
Single Slot USB/Serial cradle charges the EDA main battery and a spare battery. It also synchronizes the
•
EDA with a host computer through a USB connection.
Four Slot Ethernet cradle charges the EDA main battery and connects the EDA with an Ethernet
•
network.
Vehicle cradle charges the EDA main battery and a spare battery.
•
Miscellaneous
Four Slot Spare Battery Charger charges up to four EDA spare batteries.
•
Multimedia Card or Secure Digital (SD) Card provides secondary non-volatile storage.
•
Belt Mounted Rigid Holster holds the EDA when not in use.
•
Snap-on Modules
MSR snaps on to the EDA and adds magstripe read capabilities.
•
TRG7000 Trigger Handle adds a gun-style handle with a scanning trigger to the EDA.
•
Accessories