Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
6.
OBEX Object Push Window
Figure 3-28
In the Action: drop-down list, select Send A Picture.
7.
Tap
. The Send Local Picture window appears.
8.
Send Local Picture Window
Figure 3-29
Navigate to the picture to send to the other device.
9.
Tap Open.
10.
Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
11.
accept the picture. A Send Picture dialog appears.
Tap Ok.
12.
Serial Port Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure
the application that will use the connection to the correct serial port.
To establish a serial port connection:
Ensure the EDA is discoverable and connectable. See
1.
Using Bluetooth 3 - 21
Bluetooth Settings on page
3-24.