Routine Generator/Engine Maintenance - Miller TRAILBLAZER 302 AIR PAK Owner's Manual

9-2. Routine Generator/Engine Maintenance

.
Use information displayed on the Voltmeter/Ammeter displays to assist in scheduling maintenance (see Section 6-3).
Engine speed is regulated by an electronic governor. Engine speed adjustments may only be performed by a Factory Authorized Service Agent.
Follow the storage procedure in the engine owner's manual if the unit will not be used for an extended period.
For Compressor Maintenance, see Section 10.
n = Check
* To be done by Factory Authorized Service Agent
Every
8
Hours
n Fuel Level
Every
25
Hours
n~ Spark Arrestor Screen
(If Equipped)
Every
50
Hours
~ Weld Terminals
Every
100
Hours
~ Battery Terminals
Every
200
Hours
l Unreadable Labels
Every
500
Hours
nl Weld Cables
Every
1000
OR
Hours
~ Inside Unit
OM-229 930 Page 42
Z = Change ~ = Clean
n Oil Level
~ Cooling System
n Spark Plug Gap
n~ Slip Rings*
nl Brushes*
!
Stop engine before maintaining.
.
See Engine Manual and Maintenance Label
Recycle engine
for important start-up, service, and storage
fluids.
information. Service engine more often if
used in severe conditions.
l = Replace
n Meters for next oil ~ Oil, Fuel Spills
change interval
Z Oil nl Air Cleaner Element
Z Oil Filter l Fuel Filter
nValve Clearance*
Reference
Sections
5-4, 6-3
Sections
9-3, 9-6
Engine
Manual,
Sections
9-3, 9-4
Engine
Manual,
Section 9-4
Engine
Manual