Kenwood DDX9016S Instruction Manual page 78

CONNECTION/INSTALLATION
6
Match the protrusions of the amplifier
H
unit (-) with the markings on the film
antenna (0) and attach the amplifier.
Do not touch the lead terminal or the adhesive
side of the amplifier unit (-).
When installing the antenna on the right side
Earth sheet
Match the protrusion with
the H mark
Lead terminal of the film
Lead contact of the amplifier
antenna (0)
unit (metal part)
When installing the antenna on the left side
Earth sheet
78
7
Remove the film covering the earth sheet
and attach the earth sheet to the metal
part of the vehicle.
Provide sufficient space for the earth sheet so
that it does not obstruct the interior parts (front
pillar cover). Also take care that the interior parts
do not obstruct the amplifier unit (-).
Windscreen
Earth sheet
Front pillar cover
8
Wire the antenna cable.
Use cable clampers (=) to secure the antenna
cable to the pillar in several places.
9
Reattach the front pillar cover.
Be sure not to damage the earth sheet and
amplifier unit (-) when reattaching.
10
Connect the amplifier unit (-) to the DAB
input terminal on the rear of the unit.
11
Set <Antenna Power> to [ON].
(Page 35)