Kenwood DDX9016S Instruction Manual page 77

CONNECTION/INSTALLATION
❏ Installing the Digital Radio antenna
◊ Caution
When installing the antenna cable inside a front
pillar that contains an air bag
• The front pillar cover is secured with a special
clip which may need to be replaced when it is
removed.
Contact your vehicle dealer for details on
removing the front pillar cover and availability of
replacement parts.
Clip
Front pillar cover
• Install the amplifier unit (-) above the air bag so
that it does not obstruct the operation of the air
bag.
Air bag
1
Remove the front pillar cover of your car.
Front pillar cover
2
Clean the windscreen with the supplied
cleaner (~).
– Wait until the glass surface is completely dry
before attaching.
– If the glass surface is cold, e.g. in winter,
warm it with the defroster or a hair dryer.
3
Remove the first sheet (tag 1) on the film
antenna (0) horizontally and attach the
antenna to the windscreen.
Sheet (tag 1)
Do not touch the adhesive side of the film
antenna (0).
4
Rub the film antenna (0) gently in the
direction of the arrow shown below to
firmly stick it to the windscreen.
5
Remove the second sheet (tag 2) on the
film antenna (0) vertically.
Sheet (tag 2)
Continued on the next page...
ENGLISH 77