Kenwood DDX9016S Instruction Manual page 34

DIGITAL RADIO (DAB)
Using the Replay function
You can temporarily record the broadcast from the
current time, and replay the recorded data.
• You can not use the Replay function ([Instant
Replay] button is not available) in the following
cases:
– When the data is not recorded.
– When receiving a service of the program type
selected for <PTY Watch>. (Page 35)
• When the recording capacity is full, the older
recorded data is deleted and recording continues.
• If you change to another channel during playback,
the recorded content will be lost.
❏ Indications on the Replay mode screen
1 2 3
1 Replay time bar
Shows the remaining capacity (gray) and the
amount of buffered content (blue). If the Replay
buffer is full, the entire bar becomes blue.
• Updated every second.
2 Playback status (I: play / W: pause / O: rewind
/ N: fast forward)
34
3 Time code
Shows you the point in the Replay buffer you are
listening to.
• Example: –5:00
– You are listening to audio that is 5 minutes
behind the current broadcast.
• Updated every second.
❏ Replaying content
1
Display the Replay mode screen.
2
Perform the replay operations.
• To start/pause the playback, touch [IW].
• To rewind/fast forward 15 seconds, touch
[S]/[T].
• To rewind/fast forward, touch and hold [O]/
[N].
To return to the live mode screen: