Kenwood DDX9016S Instruction Manual page 71

CONNECTION/INSTALLATION
❏ Connecting wires to terminals for Toyota Cars (for DDX916WS/DDX916WSM)
VIDEO OUT
Page 74
REAR VIEW CAMERA
FRONT VIEW CAMERA
Pages 72 – 74
Page 74
Connect the antenna
cord to the antenna
terminal.
1
Light green (Parking sensor wire)
Purple with white stripe (Reverse
sensor wire)
Blue with white stripe (Power control
wire)
Connector B
Connector A
Connect GPS antenna (6). (Page 75)
Page 74
Page 75
AV-IN
15 A fuse
PRK SW
Connect to the vehicle's reverse lamp
harness when using the optional rear
REVERSE
view camera.
When using the optional power amplifier,
P.CONT
connect to its power control terminal.
Connect to the vehicle's harness.
Connect to the vehicle's harness.
Connect the USB extension cable
(5). (Page 72)
Connect a navigation box.
(Page 74)
Steering
Remote
8
Connect to the vehicle's parking brake detection switch harness.
• For best safety, be sure to connect the parking sensor.
Pin Color and functions of Connector A, B, C and D
A1 Orange/White
A2 Yellow
A3 Blue
A4 Red
A5 Blue
A6 Black
A8/A7 White ' / White/Black "
A10/A9 Gray ' / Gray/Black "
B2/B1 Green ' / Green/Black "
B6/B5 Purple ' / Purple/Black " Right speaker (rear)
D21 Light green/Red
D22 Purple/Red
D23 Gray/Red
If no connections are made, do not let the
cable come out from the tab.
Connect to the vehicle's
Connector D
steering remote harness.
• Depending on the type
D22
D21 D23 of vehicle, it cannot be
connected.
Dimmer
Battery
Antenna control
Ignition (ACC)
Antenna control
Ground connection
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Input 1
Input 2
Ground
ENGLISH 71