Handlebar Switches - Yamaha FAZER FZS600 Owner's Manual

Hide thumbs Also See for FAZER FZS600:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Pass switch "PASS"
2. Dimmer switch
3. Turn signal switch
4. Horn switch "
"
5. Hazard switch "
"

Handlebar switches

Pass switch "PASS"
Press this switch to flash the headlight.
Dimmer switch
Set this switch to "
beam and to "
" for the low beam.
Turn signal switch
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
EAU00118
Hazard switch "
With the key in the "ON" or "
EAU00120
tion, use this switch to turn on the haz-
ard light (simultaneous flashing of all
turn signal lights).
The hazard light is used in case of an
EAU00121
emergency or to warn other drivers
when your motorcycle is stopped
" for the high
where it might be a traffic hazard.
EAU00127
". To signal a left-hand
". When
EAU00129
"
EAU00144
"
" posi-
3-7
CAUTION:
@
Do not use the hazard light for an ex-
tended length of time, otherwise the
battery may discharge.
@
EC000006

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents