Tachometer; Self-Diagnosis Device - Yamaha FAZER FZS600 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To set the clock
1. Push both the "SELECT" and
"RESET" buttons for at least two
seconds.
2. When the hour digits start flashing,
push the "RESET" button to set
the hours.
3. Push the "SELECT" button to
3
change the minutes.
4. When the minute digits start flash-
ing, push the "RESET" button to
set the minutes.
5. Push the "SELECT" button to start
the clock.
NOTE:
@
After setting the clock, be sure to push
the "SELECT" button before turning the
main switch to "OFF", otherwise the
clock will not be set.
@

1. Tachometer

2. Red zone
Tachometer
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
CAUTION:
@
Do not operate the engine in the ta-
chometer red zone.
Red zone: 12,500 r/min and above
@
3-5

Self-diagnosis device

This model is equipped with a self-di-
agnosis device for the throttle position
sensor circuit.
If the circuit is defective, the tachome-
ter will repeatedly display the following
error code:
CB-16E
3,000 r/min
0 r/min for
3 seconds for
2.5 seconds
EAU00101
If the tachometer displays such an er-
ror code, have a Yamaha dealer check
the motorcycle.
EC000003
CAUTION:
@
When the tachometer displays an
error code, the motorcycle should
be checked as soon as possible in
order to avoid engine damage.
@
EAU01322
Current engine
speed for
3 seconds
EC000004