Indicator And Warning Lights - Yamaha FAZER FZS600 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Left turn indicator light "
2. Neutral indicator light "
3. High beam indicator light "
4. Oil level warning light "
5. Right turn indicator light "
6. Coolant temperature warning light "
7. Fuel level warning light "

Indicator and warning lights

Turn signal indicator
,
" "
The corresponding indicator light flash-
es when the turn signal switch is
pushed to the left or right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Oil level warning light "
This warning light comes on when the
engine oil level is low.
"
The electrical circuit of the warning light
"
can be checked according to the fol-
"
"
lowing procedure.
"
1. Set the engine stop switch to "
"
and turn the key to "ON".
"
2. Shift the transmission into the neu-
EAU03034
tral position or pull the clutch lever.
3. Push the start switch. If the warn-
ing light does not come on while
EAU03299
lights
pushing the start switch, have a
Yamaha dealer check the electri-
cal circuit.
EAU00061
"
EAU00063
NOTE:
"
@
Even if the oil level is sufficient, the
warning light may flicker when riding on
a slope or during sudden acceleration
or deceleration, but this is not a
malfunction.
EAU03201
@
"
Coolant temperature warning light
"
This warning light comes on when the
engine overheats. When this occurs,
stop the engine immediately and allow
"
the engine to cool.
CAUTION:
@
Do not operate the engine if it is
overheated.
@
3-3
"
EAU01716
EC000002