Clutch Lever - Yamaha FAZER FZS600 Owner's Manual

1. Engine stop switch
2. Light switch
3. Start switch " "
Engine stop switch
Set this switch to " " to stop the en-
gine in case of an emergency, such as
when the motorcycle overturns or
when the throttle cable is stuck.
Light switch
Set this switch to " " to turn on the
auxiliary light, meter lighting and tail-
light. Set the switch to "
the headlight also.
INSTRUMENT AND CONTROL FUNCTIONS
Start switch "
Push this switch to crank the engine
with the starter.
CAUTION:
@
See page 5-1 for starting instruc-
tions prior to starting the engine.
@
EAU00138
EAU00134
" to turn on
EAU00143
"
EC000005

1. Clutch lever

Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the ignition
circuit cut-off system. (See page 3-16
for an explanation of the ignition circuit
cut-off system.)
3-8
3
EAU00152