Table of Contents
Advertisement
4) Place Log 02-51 on the front right side of
the burner. Push the back of the log against
the 2 brackets with the notch on the bottom
right side of the log fi tting into the right side
of the grate.
02-75
02-51
Bracket
Bracket
02-51
5) Position Log 02-53 across the cut outs in
Logs 02-75 and 02-51 with the notch on the
left side of the log fi tting into the 2nd grate
tab.
02-53
2nd Grate Tab
Cutouts
02-53
6) Position Log 02-54 across the cutouts in
Logs 02-51 and 02-53. The notch in the
bottom right end fi tting against the 5th grate
tab.
®
Regency
PG36D Gas Log Fireplace
Notch
Notch
7) Place the bottom left front edge of Log
02-55 against the rear bracket on the
burner tray and rest the log on the cutout
on Log 02-53.
02-75
02-75
02-51
Rear Bracket
8) Place Log 02-52 between Logs 02-51 and
02-75 and on the indentation on Log 02-54.
02-51
The bottom right end sits behind the rear
grate tab.
02-51
Log indentation
02-54
02-51
5th Grate Tab
02-55
02-53
02-51
Cutouts
02-75
02-52
02-54
INSTALLATION
02-52
02-54
Photo shows rear grate tab.
Log 02-51 was removed to show the
positioning of Log 02-52.
9) Sit Log 02-50 on the front left side of the
burner. Push the back of the log against the
2 front brackets with the notch on the bottom
of the log fi tting into the fi rst grate tab.
02-50
Front Brackets
02-55
02-53
02-50
Notch
10) Place the embers on the front of the burner
tray in the places shown on the photos
below.
Place embers in these 3 locations
on the burner tray.
Rear
Grate
Tab
02-53
23
Advertisement
Table of Contents
