BMW C 650 GT Rider's Manual page 94

In order to ensure the dependab-
9
ility of the brake system, do not
permit the brake pads to wear
92
past the minimum permissible
thickness.
Have the brake pads replaced
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Check the rear brake pad
thickness
Make sure the ground is level
z
and firm and place the Maxi-
Scooter on its stand.
Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: from the
bottom right toward brake
pads 1.
Brake-pad wear limit,
rear
min 1.0 mm (Friction pad only,
without backing plate.)
If the wear indicating marks are
no longer visible:
Brake pads worn past the
minimum permissible thick-
ness can cause a reduction in
braking efficiency and under
certain circumstances they can
cause damage to the brake sys-
tem.
In order to ensure the dependab-