BMW C 650 GT Rider's Manual page 105

Rear wheel to output
shaft
Tightening sequence: Tighten
in diagonally opposite se-
quence
60 Nm
Turn the end silencer to the
initial position and align in such
a way that the screwdriver
handle from the on-board tool-
kit fits between rear wheel and
silencer.
Install screw 3 and tighten
to the specified torque while
counter-holding the nut at the
back.
Silencer to bracket
20 Nm
Tighten screw 4 to the spe-
cified tightening torque.
End silencer to front si-
lencer
19 Nm
Place the cover in position and
install screw 2.
Install screws 1.
9
103
z