BMW C 650 GT Rider's Manual page 104

9
102
Turn the end silencer out.
Apply the rear brake or extend
the side stand to activate the
z parking brake.
Remove five screws 1 from the
rear wheel, while supporting
the wheel.
Lower the rear wheel to the
ground and roll it out to the
rear.
Install the rear wheel
Malfunctions are possible
when the ABS system in-
tervenes if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS system
at the start of this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Roll the rear wheel into position
at the rear-wheel adapter and
attach it.
Install five screws 1 and tighten
to the specified torque in diag-
onally opposite sequence.