BMW C 650 GT Rider's Manual page 60

Programming options
5
You can customise the follow-
ing parameters of your anti-theft
58
alarm:
Confirmation alarm tone after
activation/deactivation of the
anti-theft alarm in addition to
visual confirmation by turn in-
dicators flashing
Rising and falling or intermittent
alarm tone
Automatic activation of the
alarm function after the igni-
tion is switched off
Default settings
The anti-theft alarm ships with
the following default settings:
z
Confirmation alarm tone after
activation/deactivation of the
anti-theft alarm: No
Alarm tone: Intermittent
Automatic activation of the
alarm function after the igni-
tion is switched off: No
Programming anti-theft
alarm
Deactivate the alarm function.
Switch on the ignition (
Press button 1 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch off
the ignition.
Press button 2 three times.
Acknowledgement tone sounds
once.
Within ten seconds, switch on
the ignition.
Acknowledgement tone sounds
three times.
The programming function is
active.
Programming is a four-step
process, although no function
is allocated to step 2. The
number of times the anti-theft
alarm status-indicator light on
the vehicle flashes corresponds
to the active programming
step. An alarm tone sounds
by way of confirmation when
button 1 is pressed, and an
acknowledgement tone sounds
38).
when button 2 is pressed.
Step 1: Do you want a con-
firmation tone to sound after
activation/deactivation of the
anti-theft alarm?
Yes:
Press button 1.
No:
Press button 2.