BMW C 650 GT Rider's Manual page 101

Force the brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc 5.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
Lift the front of the Maxi-
Scooter until the front wheel is
clear of the ground, preferably
using a BMW Motorrad front-
wheel stand.
Install the front-wheel stand
( 104).
Slacken right axle clamping
screws 1.
Remove quick-release axle 2,
while supporting the wheel.
Roll the front wheel forward to
remove.
Install the front wheel
Malfunctions are possible
when the ABS system in-
tervenes if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS system
at the start of this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
9
99
z