Getting Started; Battery Installation - Oregon Scientific Batman Power Wing Laptop Manual

Chapter 2
Chapter 2

Getting Started

Your Batman Power Wing Laptop operates on 3 "AA" batteries.
™

Battery Installation

1. Make sure the unit is turned off.
2. Using a small Phillip's head
screwdriver unscrew the battery
cover on the back of the unit.
3. Insert 3 "AA" batteries, taking
careful note of the correct polarity.
4. Replace the cover and screw the
screw back into place.
Auto-off
If there is no input on the unit for a few minutes the unit will automatically say goodbye and turn itself off to
conserve power. When you are ready to start playing again just press
and open the lid.
Caution
• Different types of batteries or new and used batteries are not to
be mixed.
+ • Only use batteries of the same or equivalent type.
+
-
-
• Remove batteries from the unit if the unit is not going to be
used for a long time.
• Remove all batteries when replacing.
• Do not dispose of batteries in fire.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy
before being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• It may contain small parts due to abuse and/or damage to the
unit. Not suitable for children under 3 years.
button to turn the unit back on or close
3