Maintenance And Storage - Toro 44538 Operator's Manual

the nozzle opening and don't direct discharge toward
bystanders.
• If the tow vehicle engine stalls or the machine loses
headway and cannot make it to the top of a slope, do
not turn the machine around. Always back the tow
vehicle slowly straight down the slope.
• Do not take an injury risk! When a person or pet
appears unexpectedly in or near the operating area,
stop operation. Careless operation, combined with
terrain angles, ricochets, or improperly positioned
guards can lead to thrown object injuries. Do not
resume operation until the area is cleared.
• Do not touch the engine or muffler while the engine
is running or soon after it is stopped. These areas
could be hot enough to cause a burn.

Maintenance and Storage

• Let engine cool before storing and do not store near
flame.
• Shut off fuel while storing or transporting. Do not
store fuel near flames or drain indoors.
• Park machine on level ground. Never allow untrained
personnel to service machine.
• Use jack stands to support components when
required.
• Disconnect battery or remove spark plug wires
before making any repairs. Disconnect the negative
terminal first and the positive last. Reconnect
positive first and negative last.
• Remove the key from the ignition switch to prevent
accidental starting of the engine when servicing,
adjusting, or storing the machine.
• Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or assistance is desired, contact an
Authorized Toro Distributor.
• To reduce a potential fire hazard, keep the engine free
of excessive grease, grass, leaves, and accumulations
of dirt. Never wash a warm engine or any electrical
parts with water.
• Be sure that the machine is in safe operating
condition by keeping nuts, bolts, and screws tight.
Check the fan shaft bearing mounting bolts and
nuts frequently to be sure that they are tightened to
specification.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and other parts of the body away from the fan and
other moving parts.
• Do not over speed the engine by changing the
governor settings. To be sure of safety and accuracy,
have an Authorized Toro Distributor check the
maximum engine speed with a tachometer.
• The engine must be shut off before checking the oil
or adding oil to the crankcase.
• Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
• Charge batteries in an open well ventilated area,
away from spark and flames. Unplug charger before
connecting or disconnecting from battery. Wear
protective clothing and use insulated tools.
• Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
• Use only Toro approved attachments. Warranty may
be voided if used with unapproved attachments.
5