Safety And Instructional Decals - Toro 44538 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Cutting/dismemberment hazard; hand—stay away from
moving parts; keep all guards and shields in place.
1. Warning—read the Operator's Manual, wear hearing and
eye protection.
1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained.
3. Warning—stop the engine; remove the ignition key and read the instructions before servicing or performing maintenance.
4. Thrown object hazard—keep bystanders a safe distance from the machine.
5. Warning—stay away from moving parts; keep all guards in place.
6. Warning—do not start the engine when machine is disconnected from the tow vehicle, hitch the machine to the tow vehicle
before starting the engine.
115-5106
115-5113
1. Fast
2. Slow
3. Rotate nozzle right
4. Rotate nozzle left
5. Engine—stop
1. Warning—read the Operator's Manual..
2. When the controller is in time-out mode and the key is in
the run position the controller can be woken by turning the
key to the engine—stop position then briefly turning the
key to engine—start.
115-5105
6
114-3360
6. Engine—start
7. Time out
8. Power
9. RF Activity
10. Contains recyclable
materials, do not discard.
115-5150