The Image Color Is Bad; The Image Is Dark - Epson EMP-715 Owner's Manual

The image color is bad

G
G
G
G
G
G
G

The image is dark

G
G
G
Has the image brightness been correctly adjusted?
see page 60
Have the cables been connected correctly?
see page 20, 27
Has the contrast been correctly adjusted?
see page 60
Has the color setting been correctly adjusted?
see page 63
Have the color density and tint been correctly adjusted?
(The display on the computer monitor or the liquid crystal screen will
not always match up with the tint of the image, but this is not an
abnormality.)
see page 60
Is it time to replace the lamp?
If the Lamp Indicator is blinking, it means that the time to replace the
lamp is drawing near. When the time to replace the lamp draws near, the
image will appear dark and the tint will deteriorate. In this event, replace
the lamp with a new one.
see page 83
Do the input signals match the connected equipment?
Set the signal type with the [Menu] - [Video] - [Input Signal] parameter.
Set [RGB] for computer signals, and [YCbCr] or [YPbPr] (depending on
the equipment signals) for component video signals.
Is it time to replace the lamp?
If the Lamp Indicator is blinking, it means that the time to replace the
lamp is drawing near. When the time to replace the lamp draws near, the
image will appear dark and the tint will deteriorate. In this event, replace
the lamp with a new one.
see page 83
Has the image brightness been correctly adjusted?
see page 60
Has the contrast been correctly adjusted?
see page 60
When the Indicators Provide No Help - 77