The Image Is Cut Up (Large)/Small; The Image Color Is Bad - Epson EMP 8100NL Owner's Manual

The image is cut up (Large)/Small

· The image is cut
up
· The image is small

The image color is bad

G
There is a possibility that the [Resize] setting has not been correctly
selected.
Press the [Resize] button.
see page 53
G
Has the [Position] been adjusted?
Adjust with [Menu] − [Video] − [Position].
see page 65
G
Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer
to the computer's instruction manual for details on how to amend the
signals.
see page 25
G
Amend the resolution for note-type and liquid crystal type
computers.
Either amend the resolution so that the display fills the entire screen,
or set the image signals so that only external output is possible.
see page 25
G
Has the system been set for dual display?
Only half of the computer screen's image will be displayed with the
projector if dual display has been set with [Display Properties] on the
control panel. Cancel the dual display setting to display the entire
computer screen image. Refer to the video driver manual supplied
with the computer in use for further details.
G
Has the image brightness been correctly adjusted?
see page 65
G
Have the cables been connected correctly?
see page 25, 35
G
Has the contrast been correctly adjusted?
see page 65
G
Has the color setting been correctly adjusted?
see page 68
G
Have the color density and tint been correctly adjusted?
(The display on the computer monitor or the liquid crystal screen will
not always match up with the tint of the image, but this is not an
abnormality.)
see page 65
G
Is it time to replace the lamp?
If the Lamp Indicator is blinking, it means that the time to replace the
lamp is drawing near. When the time to replace the lamp draws near,
the image will appear dark and the tint will deteriorate. In this event,
replace the lamp with a new one.
see page 92
When the Indicators Provide No Help - 85