Installation; Installation Procedure - Epson EMP-715 Owner's Manual

Hide thumbs Also See for EMP-715:

Table of Contents

This section provides an example of projector installation, and explanations on the projec-

tion distances and projection angles.

I Installation Procedure

This section provides an example of projector installation, and explanations on projection dis-

tances and angles.

· Do not block the ventilation outlet on the front of the projector, or the air filter (suction

inlet) on the top.

· Take note that there is a possibility that pieces of cloth or paper may be sucked into the air

filter on the top of the projector during projection.

· Do not place the projector in a location where it is subject to the direct air flow from air con-

ditioners or heaters.

· When the projector is to be placed near a wall, ensure that there is at least 20cm of space

between the wall and the projector.

· Do not cover the projector with table cloths or other material.

Installation

Caution

Table of Contents

Emp-505