In The Case Of The Mini D-Sub 15 Pin - Epson EMP-715 Owner's Manual

In the case of the mini D-Sub 15 pin

· Switch off the power supply to the projector and computer before attempting to make the
connection. Failure to observe this may result in damage.
· Confirm the shape of the cable connector and the shape of the port before making the con-
nection. Applying excessive force when the direction or shape of the connector and port
differ may result in defects and damage to the equipment.
· Connect the computer's monitor port to the projector's Computer/Component Video port
with the computer cable supplied.
G When the monitor port is the D-Sub 15 pin
Point
· Set the input signal parameter on the image menu to [RGB] once the connection has
been established.
· Do not bunch the power cable and the computer cable together. Failure to observe this
may result in noise appearing in the images, and may cause malfunctions.
· An adapter may be required when making the connection depending on the stand of the
computer's port. Refer to the computer instruction manual for further details.
· An optional MAC Adapter Set (ELPAP01) is required when connecting up to a Macintosh
computer.
22 - Connecting the projector to a computer
Caution
Monitor port
(video port)
Computer Cable
(supplied with the projector)
Computer/Component Video port
Computer/
Component Video
Out In
Audio
S-Video
R
Audio
L
Video