When The Indicators Provide No Help; The Image Is Not Projected - Epson EMP-715 Owner's Manual
Hide thumbs
Also See for EMP-715:
- User manual (168 pages) ,
- Owner's manual (134 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
I When the Indicators Provide No Help
Refer to each relevant item if the following situations arise but the indicators provide no help.
The image is not projected
G Nothing is displayed
Nothing is displayed
G
Is the Lens Cover still in place?
see page 30
G
Has the power been switched off and then on immediately?
The [Power] button will not operate after projection has been finished
(during the cooling down procedure). The [Power] button will work
again after the cooling down process Projection lamp (cooling
operations: the operation indicator is illuminated in orange) has been
completed.
see page 35
G
Is the Sleep Mode set at ON?
When the sleep mode has been set at [ON], the lamp will be
automatically extinguished if no operations occur and no signals are
input for a period of thirty minutes.
see page 62
G
Did you press the [Power] button?
see page 32
G
Has the brightness of the image been correctly adjusted?
see page 60
G
Is the system in the [A/V Mute] mode?
see page 46
Perform the reset procedure.
see page 63
G
Is the input image completely black?
There are cases where input images will become completely black owing
to screen saves, etc.
G
Are image signals being input?
No message will be displayed when the [Menu] - [Settings] and [No
Signal Display] parameter is set at [OFF]. Set either black or blue to
display the message. Refer to each relevant item when the message is
displayed.
see page 72
G
Perform the reset procedure.
see page 63
page 71
page 75
page 76
page 77
page 77
page 78
page 78
page 79
When the Indicators Provide No Help - 71
Advertisement
Table of Contents
