Troubleshooting; Operation Indicator - Epson EMP-715 Owner's Manual

This section provides explanations on potential problems and the methods of taking care of
them.
I Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to
advise the user of the projector 's status.

Operation Indicator

Indicator Status
Illuminated in
Orange
Blinking in
Orange
Illuminated in
Green
Blinking in Green

68 - Troubleshooting

Troubleshooting
Cause
Stand-by status
Cool-down proce-
dure in progress
Projection in
progress
Warm-up in
progress
Operation Indicator
Lamp Indicator
Temperature Indicator
Recovery or Status
(Not an error)
Projection will be started when the [Power] but-
ton is pressed.
(Not an error)
· Wait for a moment. The acount of time for the
projector to cool down (cooling the lamp) will
depend on the external temperature, etc.
· The [Power] button cannot be used during the
cool-down period. This will be illuminated in
orange once the cool-down process has been
completed, so press the button once more then.
(Not an error)
(Not an error)
· Wait for a moment.
· The green lamp will stop blinking and become
illuminated once the warm-up procedure has
been completed.
Reference
Page
31
35
32
32