Access Camera Through The Web Browser; System Management And Default Settings; Logging-In To The Camera - TRENDnet TV-IP322WI User Manual

TRENDnet User's Guide

Access Camera through the Web Browser

System Management and Default Settings

It is recommended that you install your camera with the CD that comes with the package
and use accompanying TRENDnetVIEW Pro software for Windows computers. If you do
not have the CD with you, please go to
model number and download the software.
If you didn't go through the CD installation wizard or you have reset the camera, your
camera has following settings:
Management IP :
Administrator name :
Administrator default password :
If you want to access your camera directly instead of using software, you can follow the
steps specified in this chapter to login to your camera. A web browser plug-in must be
installed to view live image.

Logging-in to the Camera

1. Open the web browser on your computer. In the address bar, enter the IP
address you setup through the setup CD or 192.168.10.30. (If you have a DHCP
server on your network, the IP address will be assigned dynamically. For
example, if you have a home gateway on your network and you plug-in the
© Copyright 2015 TRENDnet. All Rights Reserved.
http://www.trendnet.com/support and enter the
192.168.10.30 or a dynamic assigned
address if you connect the camera to
your existing network
admin
admin
camera on the same network, you can find the camera's IP address on your
home gateway. If you are using 192.168.10.30, make sure your computer is in
the same 192.168.10.x segment), and then press Enter.
2. Enter the user name, admin, and the password you setup through the setup CD
or the default password, admin, and then click OK.
If the camera was not setup through the CD and you are accessing it the first
time, you will be prompted to change password automatically.
TV-IP322WI
20