Table of Contents
Advertisement
TRENDnet User's Guide
3. Select "Connect camera to your wireless network using Wi-Fi
Protected Setup (WPS)".
4. Using the include security wrench to loosen the screws and remove the panel on
the bottom of the camera. If you plan on using an SD card, insert an SD card into
the SD card slot.
© Copyright 2015 TRENDnet. All Rights Reserved.
5. Connect the power adapter to the camera. The IR LEDs will turn on dime red
light. Allow 60 seconds for the camera to boot up. Click Next.
6. Press the WPS button on your wireless router for 5 seconds. Within 2 minutes,
press and hold the WPS button on the camera for 5 seconds.
TV-IP322WI
11
Hide quick links:
Advertisement
Table of Contents
