Table of Contents
Advertisement
TRENDnet User's Guide
Network
TCP/IP
Setup your basic IPv4 and IPv6 network settings on this page.
Network interface
© Copyright 2015 TRENDnet. All Rights Reserved.
Click this button to reboot this camera.
MAC Address:
Choose one of the Ethernet duplex and speed to
Duplex and Speed:
match your network. Default: auto.
Maximum transmission unit. The maximum byte size
MTU:
Ethernet data field.
Enter your first IPv4 or IPv6 DNS server address
Primary DNS:
Enter your second IPv4 or IPv6 DNS server address
Secondary DNS:
IPv4
DHCP:
Check this box if the IP address is assigned by DHCP
server.
IPv4 Address:
Load complete factory default to the camera.
Subnet Mask:
Network range of the subnet
Default Gateway:
The default route going further from camera IPv4
subnet.
IPv6
IPv6 Mode:
Choose Manual, DHCP, or Route Advertisement.
Click View Route Advertisement to find a route
advertisement.
IPv6 Address:
IPv6 address of the camera.
Prefix Length:
Length of network prefix
Default Gateway:
The default route going further from camera IPv6
subnet.
Click Save to save the changes
TV-IP322WI
32
Hide quick links:
Advertisement
Table of Contents
