Table of Contents
Advertisement
TRENDnet User's Guide
that the camera detects motion in this area. Click
Save to save the choices.
Draw Area:
Click Draw Area button to start drawing. Click and
drag on the area you want to set up the motion
detection. You can draw up to 8 different areas.
Click Stop Drawing to stop drawing motion
detection areas.
The red grids represent the detection area.
Sensitivity:
Move the slider to adjust detection sensitivity.
Clear All:
Click this button to clear all the set up areas.
© Copyright 2015 TRENDnet. All Rights Reserved.
Arming Schedule
Edit:
Click Edit to define when you want the motion
detection works.
1. Select day of the week you want to edit the
schedule.
2. Set the time period you want to enable motion
detection. (Default is 0-24 hours, all day).
3. Click Copy to Week if you want the same daily
schedule every day or you can select other day of
the week and click Copy to copy the schedule of
the day to other days.
4. Select another day of the week by clicking on its
tab to set next schedule. Click OK when you
finished your setting.
Notification
Send Email:
Check this box to send an e-mail notification when
motion is detected. Go to Events / Email to setup
email account information.
Upload Snapshot:
Check this box to send snapshots to an FTP server or
configured Network Storage when motion is
detected. Go to Network Storage or FTP to setup
server information
TV-IP322WI
46
Hide quick links:
Advertisement
Table of Contents
