Accessories - Lincoln Electric SAE-400 Operator's Manual

SAE-400
®

ACCESSORIES

K930-2 TIG Module - Provides high frequency plus a gas valve for
TIG welding. A water valve is available as an option. Requires 115
volt AC input. (Limited to 250A - 60% Duty Cycle).
K802-D Power Plug Kit - Kit includes male plug for 20 amp
receptacle.
K2641-2 Trailer - FOUR-WHEEL STEERABLE YARD TRAILER WITH
DUO-HITCH
• For off-road, plant and yard use with an overall width of 55 in.
• Includes an automatically engaging drawbar lock when the
drawbar is raised to the vertical position.
• 13 in wheels with wheel bearings packed with high viscosity,
high pressure, low washout Lubriplate® grease.
• Stiff 3/16 in welded rectangular steel frame construction is
phosphate etched and powder coat painted for superior rust
and corrosion resistance.
• Also includes a Duo-Hitch™ - a 2 in Ball/Lunette Eye
combination hitch.
K2637-2 Trailer - A 2-wheel trailer designed for road(1), off road,
in-plant and yard towing. Trailer mounts directly to welder base.
Comes standard with a Duo-Hitch™, a 2" Ball and Lunette Eye
combination hitch.
Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
1For highway use, consult applicable federal, state and local laws regarding
possible requirements for brakes, lights, fenders, etc.
WARNING
Pipe Thawing with an arc welder can cause fire, explosion,
damage to electric wiring or to the arc welder if done
improperly. The use of an arc welder for pipe thawing is not
approved by the CSA, nor is it recommended or supported
by Lincoln Electric.
K704 Standard Accessory Kit - Includes electrode and work
cables, headshield, work clamp and electrode holder.
K385-[ ] CV Adapter - Provides constant voltage output for
semiautomatic welding. (Field installation only).
K1735-1 MULTI-WELD 350 - For multiple arcs from the DC output
of a welding power source. See bulletin E5.300 for Multi-Weld 350
and distribution system.
K2144-1 Oil Drain Kit- Includes ball valve, hose and clamp.
C-1
ACCESSORIES